Fluke CableIQ, User Manual, Page: 28 / 92

CableIQ Qualification Tester
Users Manual
18
Selecting Tests to Run
To select tests to run during an Autotest:
Turn the rotary switch to SETUP ; then select Autotests. Or
turn the rotary switch to AUTOTEST ; then press
J Setup .
Figure 5 describes how to use the Autotest setup screens.
avv40f.eps
A
The tests available. To select (
s
) or deselect (
n
) a test, use
D A
to highlight the test; then press H or J .
B
The pairs required (
q
) and optional (
s n
) for twisted pair tests.
C To select or deselect pairs for the highlighted test, press K
Pairs .
D To select or deselect an optional pair, use
B C
to highlight the
pair; then press
H
or
J
.
Press
I
to save your settings.
Figure 5. Autotest Setup Screens