Fluke CableIQ, User Manual, Page: 15 / 92

W
S ymbols and S afety Information
5
W
Symbols and Safety Information
Table 1 describes the international electrical symbols used
on the tester and in this manual.
Table 1. International Electrical Symbols

Warning

To avoid possible fire, electric shock, or
personal injury:
• Do not open the case; no user-serviceable
parts are inside.
• Do not modify the tester.
• Do not use the tester if it is damaged.
Inspect the tester before use.
W Warning or Caution: Risk of damage or destruction to
equipment or software. See explanations in the manual.
X
Warning: Risk of electric shock.

Consult the user documentation
j
This equipment not for connection to public
communications networks, such as active telephone
systems.
~
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types in
the WEEE Directive Annex I, this product is classed as
category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted
municipal waste.
To return unwanted products, contact the
manufacturer’s web site shown on the product or
your local sales office or distributor.

40 year Environment Friendly Use Period (EFUP) under
China Regulation - Administrative Measure on the
Control of Pollution Caused by Electronic Information
Products. This is the period of time before any of the
identified hazardous substances are likely to leak out,
causing possible harm to health and the environment.

Conforms to relevant Australian standards.

MSIP-REM-FLK-016005052: EMC approval for
Korea
Class A Equipment (Industrial Broadcasting &
Communication Equipment)
This product meets requirements for industrial (Class A)
electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for
use in business environments and is not to be used in
homes.