Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 587 / 700

Chapter 17: Use Projects
How to Make ID Sets
551
In the LinkWare Live ID list utility, international characters will
increment, so you can use them for sequential characters in your
IDs.
About Next ID Sets
Next ID
sets have one ID that the tester increments each time you
do a test. To make a
Next ID
set, do not enter a
Last ID
when you
make an ID set.

Numbers increment sequentially:
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, ... 99, 100, 101...

Letters increment through the English alphabet:
A, B, C, D, ... Z, AA, AB, AC, AD, ... AZ, BA, BB, BC...

Numbers and letters do not cause each other to increment:
1Y, 1Z, 1AA, 1AB, ... 1ZZ, 1AAA, 1AAB...

The tester does not increment symbols or accented characters.
When you use a
Next ID
set, the set under
IDs Untested
on the
CHANGE ID
screen shows only the next ID. To save the next test
with a different ID, tap the
Next ID:
panel, then enter a different
ID.
Each project can have one
Next ID
set. You can use the
Next ID
set
for copper or fiber results.
If your project has only a
Next ID
set, the tester cannot calculate
the percentage of the project that is completed, so the
% Tested
value does not show on the home screen.
If your project has both a
Next ID
set and sets with first and last
IDs, the
% Tested
value includes tests you saved with
Next ID
. For
example, if you have one
Next ID
set and one set with 10 IDs, and
you save 10 results with next IDs, the
% Tested
shows 50% (10
saved results divided by 20 IDs).