Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 58 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
22
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to “If the Tester Does Not
Operate as Usual” on page 598.
How to Use the Touchscreen
The main tester’s Taptive user interface lets you use a touchscreen
to control the tester. You can operate the touchscreen with your
fingertip or with a stylus that is made for projected capacitance
touchscreens.
W
Caution
For correct operation and to prevent damage to the
touchscreen:

Touch the screen only with your fingers or with a
stylus that is made for projected capacitance
touchscreens. Do not use too much force.

Do not touch the screen with sharp objects.
Note
The touchscreen will not respond if you tap it with
your fingernail or an incorrect type of stylus or if you
wear non-conductive gloves.
To use the touchscreen

To select an item on the screen, tap the item lightly with your
fingertip.
 To scroll a screen, lightly touch the screen then move your
fingertip in the direction you want the screen to move.

On screens that show a plot, trace, or FiberInspector image,
use the pinch and reverse-pinch gestures to change the
magnification on the screen. See Figure 5.