Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 515 / 700

Chapter 12: The OptiFiber Pro HDR OTDR Module
Bi-Directional SmartLoop Tests
479

The tester does not calculate averaged results in some
situations, for example if a launch, tail, or loopback cord was
not detected or if the distance to the end was not the same in
both directions.
GPU197.EPS
Figure 187. EventMap for Averaged, Bi-Directional SmartLoop Results
 The purple fiber is the loopback cord.
 The longest segment length of the two directions.

Tap this button to see the results for the other fiber (
A
or
B
).
Touch for 3 seconds to see a summary of the results from
ends 1 and 2 on fibers A and B. To see the EventMap for a result
in the list, tap the result.
A
B
I
G
C
D
F
H
E