Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 107 / 700

Chapter 3: Certify Twisted Pair Cabling
DSX CableAnalyzer Connectors, Keys, and LEDs
71

RJ45 jack for communications between the main and remote
testers when you do alien crosstalk measurements. See “About
the AxTalk Analyzer Kit” on page 158.
 LCD display with touchscreen


: Starts a test. To start a test, you can also tap
TEST
on the
display. The tone generator turns on if a remote tester is not
connected to the main tester. See “How to Use the Tone
Generator” on page 155.


: Power button. Versiv 2: The LED in the button shows the
status of the battery charging process. See Table 2 on page 18.


: Press

to go to the home screen.
 Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge the
Battery” on page 18.
 RJ45 connector: Lets you connect to a network for access to Fluke
Networks cloud services.
 Micro USB port: This USB port lets you connect the tester to a PC
so you can upload test results to the PC and install software
updates in the tester.

Type A USB port: This USB host port lets you save test results
on a USB flash drive and connect the FI-1000 video probe to the
tester. On a Versiv main tester, this port lets you connect a Wi-Fi
adapter for access to Fluke Networks cloud services. (Versiv 2
testers have an internal Wi-Fi radio.)
 Headset jack. See “How to Use the Talk Function” on page 157.
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS >
Main as Remote.