BC190/820
Universal Mains-Power Adapter
Instruction Sheet
Introduction
The BC190/820 is a universal mains-power adapter for measurement,
control, and laboratory equipment. The BC190/820 is intended for
operating and charging the Fluke 190-Series ScopeMeter Test Tool. The
mains-power adapter is based on the switched-mode concept for high
efficiency and low stand-by power consumption. It operates in a wide
range of input voltages from 100 Vac up to 240 Vac nominal. Either a
locally suitable power cord or a universal mains cable and a set of mains
plug adapters are included. The adapter is suitable for most types of
mains outlets.
htx01.eps
Figure 1. BC190/820 Mains-Power Adapter
Unpack
This universal mains-power adapter consists of the following items:
•
BC190/820 Switch Mode Power Adapter (main unit) with dc cable
• Mains cord with fixed power plug
or
Universal mains cord with male and female connector, set of mains
plug adapters (6 qty) for all standard mains outlets, and Brazilian style
mains cord adapter (0.25 m / 10 inch approximate).
At delivery of the BC190/820, make sure that the set is complete and all
items are undamaged. Contact your supplier if you see any damage.
PN 4465887
February 2014
© 2014 Fluke Corporation. Product specifications
are subject to change without notice.
All rights reserved.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and
workmanship under normal use and service. The warranty period is one year and
begins on the date of shipment. Parts, product repairs, and services are warranted
for 90 days. This warranty extends only to the original buyer or end-user customer
of a Fluke authorized reseller, and does not apply to fuses, disposable batteries,
or to any product which, in Fluke’s opinion, has been misused, altered, neglected,
contaminated, or damaged by accident or abnormal conditions of operation or
handling. Fluke warrants that software will operate substantially in accordance
with its functional specifications for 90 days and that it has been properly recorded
on non-defective media. Fluke does not warrant that software will be error free or
operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products
to end-user customers only but have no authority to extend a greater or different
warranty on behalf of Fluke. Warranty support is available only if product is
purchased through a Fluke authorized sales outlet or Buyer has paid the applicable
international price. Fluke reserves the right to invoice Buyer for importation costs of
repair/replacement parts when product purchased in one country is submitted for
repair in another country.
Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase
price, free of charge repair, or replacement of a defective product which is returned
to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center
to obtain return authorization information, then send the product to that service
center, with a description of the difficulty, postage and insurance prepaid (FOB
Destination). Fluke assumes no risk for damage in transit. Following warranty
repair, the product will be returned to Buyer, transportation prepaid (FOB
Destination). If Fluke determines that failure was caused by neglect, misuse,
contamination, alteration, accident, or abnormal condition of operation or handling,
including overvoltage failures caused by use outside the product’s specified rating,
or normal wear and tear of mechanical components, Fluke will provide an estimate
of repair costs and obtain authorization before commencing the work. Following
repair, the product will be returned to the Buyer transportation prepaid and the
Buyer will be billed for the repair and return transportation charges (FOB Shipping
Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR
THEORY.
Since some countries or states do not allow limitation of the term of an implied
warranty, or exclusion or limitation of incidental or consequential damages, the
limitations and exclusions of this warranty may not apply to every buyer. If any
provision of this Warranty is held invalid or unenforceable by a court or other
decision-maker of competent jurisdiction, such holding will not affect the validity or
enforceability of any other provision.
Fluke Corporation
Fluke Europe B.V.
P.O. Box 9090
P.O. Box 1186
Everett, WA 98206-9090
5602 BD Eindhoven
U.S.A.
The
Netherlands
11/99
To register your product online, visit
register.fluke.com
.
SERVICE CENTERS
To locate an authorized service center, visit:
http://www.fluke.com
.
Or call Fluke using any of the phone numbers listed below:
+1-888-993-5853 in U.S.A. and Canada
+31-40-2675200 in Europe
+1-425-446-5500 from other countries
