Fluke 9640A Series, Instruction Manual

Page: 89 / 324

Local Operation
Operating the Instrument
3
3-41
Table 3-14. Leveled-Sine Fields
ead92f.bmp
Field Range Units
Frequency
9.000 Hz to 4.0240000000
GHz Hz (kHz, MHz, GHz)
Frequency Step
0.1 Hz to
4.024000000000 GHz Hz (kHz, MHz, GHz), ppm**, %*
Absolute
Any value within extremes
of frequency range above Hz (kHz, MHz, GHz), ppm**, %*
Frequency Offset
As UUT Error
Any value within extremes of
frequency range above ppm**, %**
Level
-130.000 to 24 dBm (50
Ω
)
20 dBm max >125.75 MHz
14 dBm max > 1.4084 GHz
-136.000 to 18 dBm (75
Ω
)
14 dBm max >125.75 MHz
8 dBm max > 1.4084 GHz
dBm, Vp-p and Vrms (uV, mV, V),
W (nW, uW, mW, W), dBuV
Level Step
0.001 dB to 130 dB dB, Vp-p and Vrms (uV, mV, V), W
(nW, uW, mW, W), ppm**, %*
Absolute
Offset may be applied in
either polarity to the full
dynamic range of the parent
parameter dB, Vp-p and Vrms (uV, mV, V), W
(nW, uW, mW, W), ppm**, %*
Level Offset
As UUT Error
Will be calculated for any
permitted Offset value subject
to limitations of % or ppm if
these units are used (see
below) dB, ppm**, %*
* Any entry expressed in % (or converted to %) is subject to a limit of
±
1000% for offset and +1000% for step and will also be limited to the
dynamic range of the instrument.
** Any entry expressed in ppm (or converted to ppm) is subject to a limit of
±
10000ppm for offset and +10000 ppm for step and will also be
limited to the dynamic range of the instrument.