Fluke 9640A Series, Instruction Manual, Page: 311 / 324

Lists of Replaceable Parts
Introduction
8
8-3
Introduction
This chapter contains an illustrated list of replaceable parts for the 9640A RF Reference
Source to the board level only. Parts are listed by assembly or kit; alphabetized by
reference designator. Each assembly or kit is accompanied by an illustration showing the
location of each part and its reference designator. The parts lists give the following
information:
•
Reference designator
•
An indication if the part is subject to damage by static discharge
•
Description
•
Fluke stock number
•
Total quantity
•
Any special notes (i.e., factory-selected part)
How to Obtain Parts
Electrical components may be ordered directly from the manufacturer by using the
manufacturers part number, or from the Fluke Corporation and its authorized
representatives by using the part number under the heading FLUKE STOCK NO. To
order components directly from Fluke Corporation, call (toll-free) 800-526-4731. Parts
price information is available from the Fluke Corporation or its representatives.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
•
Fluke stock number
•
Description (as given under the Description heading)
•
Quantity
•
Reference designator
•
Part number and revision level of the pca containing the part
•
Instrument model and serial number
r
Note
This instrument may contain a Nickel-Cadmium battery. Do not mix with
the solid waste stream. Spent batteries should be disposed of by a qualified
recycler or hazardous materials handler. Contact your authorized Fluke
service center for recycling information.