Fluke 9640A Series Instruction Manual Download Page 154

Page: 154 / 324

9640A

Instruction Manual

4C-18

ROSCillator Subsystem

Keyword

Parameter

Form

*RST

Condition

Notes

[:SOURce]:ROSCillator

Command long form

[:SOUR]:ROSC:SOURce[?]

<name>

{INTernal |

EXTernal

ENARow}

Unchanged

Selects the source of the
reference frequency and on
9640A-STD, the pull range
available.

EXTernal requires a reference
within

1.0 ppm on 9640A-LPN.

9640A-STD requires reference
within

30 ppm or within

1 ppm

if ENARow selected.

[:SOUR]:ROSC:EXTernal:

FREQuency[?]

<NRf>

Unchanged

Sets the external Frequency in
Hz.

[:SOUR]:ROSC:LOCKed?

n/a

Query returns 1 if frequency is
locked to either the internal or
external [:SOURce].

SYSTem Subsystem

Keyword Parameter

Form

*RST

Condition

Notes

SYSTem

Command long form

SYSTem:ERRor?

n/a

Query only.

Returns instrument error string
or 0 if no error.

SYST:VERSion?

n/a

Query only.

Returns SCPI version to which
instrument complies.

SYST:MSTRike?

n/a

Query only.

Returns a string of 20 ASCII ‘1’s
or ‘0’s. The characters define the
modifications (Mod Strike) that
have been applied to this
particular instrument. Each
character is comma separated.

Summary of Contents for 9640A Series





































































































































































































































































































































Search results

Summary of Contents for 9640A Series

Reviews:

Brands by name

Popular brands

Fluke 9640A Series, Instruction Manual

Search results

Summary of Contents for 9640A Series

Reviews:

Brands by name

Popular brands