Fluke 9640A Series, Instruction Manual

Page: 141 / 324

SCPI Commands
SCPI Command Reference
4C
4C-5
INSTrument Subsystem
Keyword Parameter Form
*RST
Condition
Notes
INSTrument
Command long form
:INST:CATalog? n/a
Query only command that returns a
comma-separated list of strings which
contains the names of all logical
instruments:
SINE,SWEEP,AM,FM,PM
:INST:CAT:FULL? n/a
Query only command that returns a list
of string - number pairs. The string
contains the name of the logical
instrument. The immediately following
NR1-formatted number is its associated
logical instrument number:
SINE1, SWEEP2,AM3,FM4,PM5
:INST:NSELect[?] <NRf> 1
This command is used in conjunction
with the SELect command. It serves the
same purpose, except that it uses a
numeric value instead of the identifier
used in the SELect command.
When queried it shall return the logical
instrument number
Changing the selected instrument will
put the output into standby.
Note that the query version of this
command can report the selected
functions as zero (0) when the
instrument is in a state such as
calibration or selftest.
:INST[:SELect][?] <string> SINE
This command selects the instrument as
the default. When a logical instrument is
selected, all other logical instruments are
unavailable for programming until
selected. The selections are
SINE, SWEEP, AM, FM, PM.
The query returns the string name of the
currently selected instrument.
Changing the selected instrument will
put the output into standby.
Note that the query version of this
command can report the selected
functions as “NONE” when the
instrument is in a state such as
calibration or selftest.