Fluke 9102S, User Manual

Page: 10 / 34

9102S
User’s Guide
6
Parts and Controls
The user should become familiar with the Product and its parts (See Figure 2 and Figure 3 ).
Rear Panel
Mains power cable - The removable mains power cable attaches to the rear of the Product. It plugs
into a standard 115 V ac (optional 230 V ac) grounded socket.
DC Power Jack - The Product can be used with a dc power source. The dc input jack requires 12 V
and 2.6 A. See Figure 2 ,

for pinout.
Power Switch - The power switch is located on the rear of the Product. The switch is either on or off.
The on position is for normal operation. The off position disconnects power to the entire unit.
Fan - The Product has a variable speed fan. Under certain circumstances, the fan may turn off. The fan
shuts off at 100 °C and above. Slots at the top and around the corners of the Product are provided for
airflow. The area around the Product must be kept clear to allow for adequate ventilation. The air is
directed from the front to the back. Allow 6 inches of open space around the Product to allow adequate
ventilation.
RS-232 - The RS-232 serial port provides a means for connecting the Product to a computer or a
printer using the included serial cable.