Fluke 8845A, User Manual

Page: 66 / 103

8845A/8846A
Users Manual
3-24
Querying the Firmware for Revision Level
The Meter makes available the hardware version, software version, and serial number of
the instrument.
To view the versions and serial number:
1.
Press
I
.
2. Press the soft key under
SYSTEM
.
3. Press the soft key under
VE SN
under the Setup menu.
The display shows the outguard software version (
OutG SW
), the inguard software
version (
InG SW
), the outguard hardware version (
OutG HW
) and the inguard
hardware version (
InG HW
). Also displayed is the Meter’s serial number
(
Serial #
).
Adjusting Display Brightness
Setting the brightness of the display is accessible through the Instrument Setup key.
To adjust display brightness:
1.
Press
I
.
2. Press the
SYSTEM
soft key.
3. Press the
BRIGHT
soft key.
4. Press one of the soft keys under
LOW
,
MEDIUM
, and
HIGH
.
5. Press
B
to return to the previous menu.
Setting the Meter’s Date and Time
1. Press
I
.
2. Press the
SYSTEM
soft key.
3. Press the
DATE TIME
soft key.
4. To adjust the display to the desired date and time, press either
<--
or
-->
to select
a specific digit or the month.
With the desired digit or month selected, press the soft key labeled
--
to decrement
the digit or
++
to increment the digit.
5. Press the
ENTER
soft key to set the date and time and return to the system menu.
USB Operation
Starting with software version OutG SW 1.0.688.18, the USB memory operation offers a
variety of capabilities. As an example, a USB device can be used to store readings either
directly from the A/D or by transferring readings from internal memory. The data stored
in the USB memory device is in a comma delimited (CSV) format.
USB Storage Capacity and Write Time
The 8846A USB storage limit is 50,000 readings every time START is pressed (F1 soft
key press) . Previous versions stored 50,000 readings in 10 files, each with 5,000 readings.
This version stores 50,000 readings in five files, with 10,000 readings each.
If storing readings to the USB memory device is not completed (or is interrupted by
changing function, NPLC, remote...), press
MEMORY
,
MANAGE MEMORY
,
INIT MEAS TO USB
so volatile readings in internal memory are stored to the USB.