background image

5623B

Users Guide

2

Safety Information

Use this instrument only as specified in this manual. Otherwise, the protection provided by the 

instrument may be impaired.

The following definitions apply to the terms “Warning” and “Caution”.

“Warning” identifies conditions and actions that may pose hazards to the user.

“Caution” identifies conditions and actions that may damage the instrument being used.

arning  

W

To avoid personal injury, follow these guidelines:

DO NOT use this instrument to measure the temperature of any hazardous

live component (>30 V ac rms, 42 V ac peak, or 60 V dc).

Use of this instrument at high temperatures for extended periods of time can

cause the handle to become hot.

Follow all safety guidelines listed in the Users Guide.

Calibration Equipment should only be used by trained personnel.

• Use the Product only as specified, or the protection supplied by the Product

can be compromised.

DO NOT use the Product around explosive gas, vapor, or in damp or wet

environments.

Caution  

W

To avoid possible damage to the instrument, follow these guidelines:

DO NOT drop or hit the probe in any way. This will cause damage to

the probe internally and affect its calibration.

Read “PRT Care and Handling Guidelines” before removing the PRT

from the shipping box. Incorrect handling can damage the PRT and

void the warranty.

Keep the shipping container in case it is necessary to ship the PRT.

Incorrect packaging of the PRT for shipment can cause irreparable

damage.

Summary of Contents for 5623B













Reviews: