Fluke 5500A, Service Manual

Page: 141 / 296

SC600 Option
Equipment Required for Calibration and Verification
6
6-15
6-27. Equipment Required for Calibration and Verification
Table 6-15 lists the equipment, recommended models, and minimum specifications
required for each calibration and verification procedure.
Table 6-15. SC600 Calibration and Verification Equipment
Wave Generator and Edge Amplitude Calibration, AC Voltage and TD Pulser Verification
Instrument Model Minimum Use Specifications
Digital
Multimeter HP 3458A
Voltage
1.8 mV to
±
130 V p-p Uncertainty: 0.06%
Edge 4.5 mV to 2.75 V p-p Uncertainty: 0.06%
Adapter Pomona #1269
BNC(f) to Double Banana Plug
Termination Feedthrough 50
Ω
± 1% (used with Edge Amplitude
Calibration and AC Voltage Verification)
BNC Cable (supplied with SC600)
Edge Rise Time and Aberrations Verification
High-
Frequency
Digital Storage
Oscilloscope Tektronix 11801 with
Tektronix SD-22/26
sampling head, or
Tektronix TDS 820 with
8 GHz bandwidth
Frequency 12.5 GHz
Resolution 4.5 mV to 2.75 V
Attenuator
Weinschel 9-10 (SMA)
or Weinschel 18W-10
or equivalent 10 dB, 3.5 mm (m/f)
Adapter BNC(f) to 3.5 mm(m)
BNC Cable (supplied with SC600)
Leveled Sine Wave Amplitude Calibration and Verification
AC
Measurement Fluke 5790A
Range 5 mV p-p to 5.5 V p-p
Standard
Frequency 50 kHz
Adapter Pomona #1269
BNC(f) to Double Banana Plug
Termination Feedthrough 50
Ω
± 1%.
BNC Cable (supplied with SC600)
DC and AC Voltage Calibration and Verification, DC Voltage Verification
Digital
Multimeter HP 3458A
Adapter Pomona #1269
BNC(f) to Double Banana Plug
Termination Feedthrough 50
Ω
± 1%.
BNC Cable (supplied with SC600)