SET UP DEVICE: PRNT 4
>LINEFEED: ON
LR
FORM FEED: NO
If there are no setup commands for a particular device, the window shows “NO
SETUP OPTIONS FOR THIS DEVICE.”
You can scroll through the setup parameters using the
UD
buttons. The values
of parameters can be changed using the numeric keys or the
LR
buttons as
is appropriate for the parameter type. Press
ENTER
to set the parameter.
With function commands you can use the
LR
buttons to change “NO” to
“YES” and then press
ENTER
to execute the function. If
ENTER
is pressed
with “NO” nothing will happen except the cursor will move down to the next
line. Press
EXIT
to exit.
5.4.3
Calibrate Device
The
CAL DEVICE
soft-key function is used for accessing module parameters
and functions relating to device calibration. This function may be selectively
locked out using the password feature (see Section 5.5.3 below). If the CAL
DEVICE password option is set ON, in order to access this function you must
enter the correct four-digit password. A screen appears requesting the pass-
word. Use the numeric keys and
ENTER
to enter the password. If the correct
password is entered, the
CAL DEVICE
function continues.
PASSWORD REQUIRED FOR ACCESS.
PASSWORD:
A window appears showing a list of devices. The list includes the names of all
devices followed by the position number of the module to which it belongs.
The device is selected using the
UD
buttons and pressing
ENTER
.
55
5 Soft-Key Functions
Module Menu
