Industrial ScopeMeter®
Scope and Meter Mode
25
Waveform Smoothing
To smooth the waveform:
1. Push
to open the Scope and Meter button bar.
2. Push
2
to open the SCOPE SETTINGS menu.
hxv16.eps
3. Use
YZ
to highlight the Type as
Smooth
. Both the
input A and input B waveforms are smoothed.
4. Push
to make the change.
5. Push
4
to exit the menu.
Waveform smoothing suppresses noise without loss of
bandwidth. Waveform samples with and without
smoothing are shown in Figure 11. Smoothing is the
average of eight acquired waveforms. Glitch detect is
turned off in this mode.
hxv17.eps
Figure 11. Waveform Smoothing
1.888.610.7664
Fluke-Direct
.com
