Fluke Calibration 5522A, Getting Started

Page: 13 / 42

Multi-Product Calibrator
How to Contact Fluke
3
XW
Warning
To prevent personal injury:
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
To prevent possible electrical shock, fire, or personal injury:
•
Do not use the Product if it operates incorrectly.
•
Replace the mains power cord if the insulation is damaged
or if the insulation shows signs of wear.
•
Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V
dc.
•
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
•
Make sure the ground conductor in the mains power cord is
connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
•
Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and rated
for the Product.
•
Use only cables with correct voltage ratings.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
•
Technical Support USA: 1-800-99-FLUKE (1-800-993-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-3434-0181
•
Singapore: +65-738-5655
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com .
To register your product, visit http://register.fluke.com .
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals .