User Manual
E110-P
Page 68
FW_E110-P_M_v0301-01_EN
APPENDIX D - REMOTE CONFIGURATION TOOL
D.1
INTRODUCTION
The free PC software can be downloaded and installed onto your computer system. The software
package allows you to set the configurations as desired, up- or download the settings to the MEM
and print a hardcopy for each product. With the software, programming of multiple products can be
done very easy.
D.2
CABLE CONNECTION
Before opening the enclosure, consult
Section 6.2.3: Opening, assembling and closing the unit [»38]
.
To connect the MEM to a PC, a cable suitable for the supplied type of communication (CB, CH, CU,
CX) should be used, as illustrated in the following image:
CONFIG
USB
MINI
USB
USB
USB
USB
CH: RS485
CX: service connector
ACE02
ACE06
ACE07
ACE01
CB: RS232
CU: USB
Accessory:
Fig. 45:
Cable connection between MEM and PC.
