Figure 35. FMQuadro (Address summary table)
To use the address summary table, do the following steps:
1.
Extend the table by clicking the
+
button at the upper right-hand
corner of the table.
• The Unit ID and IP Address details for all Fluidmesh units
in the network will be shown.
2.
Enter a unique reference name for each Fluidmesh unit by
clicking the
Name
field for the unit and entering the text of the
name.
3.
Collapse the table by clicking the
+
button again.
Adding an aerial map to the FMQuadro view
You can add an aerial image to the FMQuadro view (
). This allows you to superimpose the network map over a map of the
terrain on which the network has been installed. This allows you to more
easily visualize component placement, line-of-sight between antennas,
and other factors.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 87 of 180