Figure 21. Fluidmesh Configurator (landing page)
2.
The lower section of the
RACER™ Configuration Mode
box has
two radio buttons that show whether the unit is in
Online (Cloud-
Managed)
mode, or
Offline
mode.
3.
If the unit is not in the correct mode, click the
Online (Cloud-
Managed)
or
Offline
radio button as needed.
• A confirmation dialog will be shown, asking if you want to
switch the unit to the chosen mode.
4.
To switch the radio to the chosen mode, click the
Confirm
button.
• A ten-second countdown will be shown.
• The Configurator interface web page will reload.
• The unit will be switched to the chosen configuration mode.
Uploading a device configuration file from RACER
A RACER device configuration template contains a set of pre-configured
parameters that can be customized and applied to a single Fluidmesh
device, or to a group of devices.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 63 of 180
