13
In case you are not getting the logging screen, look in the troubleshooting section.
5.2 End-user license agreement and region of operation
After the login, the web-based user interface allows you to change the settings of the
Fluidmesh unit. The first time you log-in, you will be asked to accept the terms of the
end-user license agreement and to select the country where you plan to operate the
unit. You must accept the terms of the license agreement in order to activate the
device. If you do not wish to accept the terms of the license agreement, please turn
off the unit and contact Fluidmesh Networks.
Picking the wrong country/regulatory domain setting might make the unit operations
illegal in your country.
5.3 Navigating the web-based interface
The menu on the right allows you to navigate through the settings of the Fluidmesh.
The home page is “General Mode” that allows you to change the mode of operation
of the device.
5.4 General Mode: mode of operation and LAN
Every Fluidmesh has two modes of operations:
Camera/relay mode
