Filter Operation General Description (Figure 2)
Filtration
Water enters the filter through the “Inlet” (1) and passes through the screen (2), which
purifies the water by separating dirt smaller particles from the water. As more water flows
through, dirt builds up on the screen. As dirt builds up on the screen is causing to a
differential pressure between the in let and outlet
Cleaning Process
When the difference in pressure (
P) reaches the preset value on the differential
pressure indicator, or the dwell time between flushing passed. The controller transmits
a signal for a 10 second flushing cycle. The flushing valve (4) opens, pressure is
released from the inner side of the fine screen (2) the electric motor (5) simultaneously
rotates the brushes (3) around its axis. The brushes wipe all the dirt and efficiently clean
the entire internal screen (3) surface.
At the end of the 10 second cycle the flushing valve (4) closes and the operation of the
electric motor (5) is stopped. The filter is now ready for the next cycle,
Figure 2: Filter Assembly
For more information:
WEB: FLTR.com.au PHONE: (+61) 1300 62 4020 EMAIL: [email protected] SKYPE: Purple.Engineering
Summary of Contents for CSB 10
Page 1: ...Tekleen CSB USERS MANUAL...
