Eagle Eye Essential IV
Installation and Operation Instructions
Insert Eagle Eye with sensor into cell.
Rotate valve into lock position.
Disconnect single point watering hose
from swivel T on chosen cell.
Remove valve.
Components
(1) EA-040 (BLACK)
(1) EA-048 (MAVERICK)
(1) EA-041 (RED)
(1) Instruction Sheet
(1) EA-042 (WHITE)
(1) Self-tapping Screw
(1) EA-043 (ORANGE)
Tools Required
Power Drill
1/4” Hex Head Driver Bit
Specifications
Max Current Draw: 15 mA
Operating Voltage Range: 4V-12V
Operating Temp: -40°F - 176°F
Remove yellow cap and install swivel T.
Fasten #8 ring terminal with supplied
screw into negative strap minimum 3
maximum 4 cells towards negative post
(DO NOT CROSS ROWS)
Reconnect single
point
watering
hose onto swivel T.
1
3
*
5
2
4
6
BL-644
For installation on small plate batteries, see page 2.
