background image

Thank you for purchasing your new greenhouse. We recommend you familiarize yourself with the instruc-
tions and read all safety information before you commence assembly.

 

The  assembly  instructions  mainly  consist  of  detailed  illustrations  and  no  specific  technical  knowledge  is 
required for the assembly of the greenhouse. 

 

These  instructions  are  divided  into  sections

Base,  Side  gable,  Rear  wall,  Front  wall, Roof,  Vent,  Door, 

Louver,  Polycarbonate  or  Glass,  Fixing  Spring  clip  or  PVC  capping  bar,  Down  pipes,  Anchoring  green-
house to slab or base etc.

 

The house is packed in one carton and contains all of the parts and fittings. Package1(x2) mainly for side 
gable parts, Package 2 for rear wall parts , Package 3 for front wall parts, Package 4 for roof parts, Pack-
age  5  for  vent  parts,  Package  6  for  door  parts,  Package  7  for  Louver  parts,  Package  8  for  down  pipes 
parts, fixing spring parts or PVC bars in other package. etc.  All of the aluminum profiles are marked with a 
part number corresponding to the numbers given on the drawings and in the separate parts list. Nuts, bolts 
and fittings will be found in the relevant package.

  

The polycarbonate panel is packed in one carton,  The sheets of Polycarbonate are not marked with a part 
number, but the sizes appear in the overview. When fitting the Polycarbonate, the side with the opal film/
text must turn outward.

  

If include base, base is packed in another carton.

 

Safety Warning

 

1.

Aluminum profiles, polycarbonate and glass can potentially cause injury. Please ensure you wear pro-
tective goggles, gloves, headgear and suitable footwear when assembling and glazing the building.

2.

Please remember that glass is fragile and should be handled with extreme care. Always clear up and
dispose of any breakages immediately.

3.

Do not assemble the greenhouse in high winds.

4.

For  safety  reasons  and  ease  of  assembly,  we  recommend  that  this  greenhouse  is  assembled  by  a
minimum of two people.

5.

The product you have purchased is intended only for the growing of plants and should only be used for
this purpose. When used for other purposes we will take no responsibility.

6.

When using a step ladder one person should steady it at all times whilst the other works.

7.

Should you encounter difficulties constructing this house, or in positioning the glass or polycarbonate
sheets, please contact your retailer–

 

do not use force!

8.

The greenhouse must always be anchored.

9.

In the event of high winds, close all doors and vents.

10. In the event of heavy snowfall, Please support the greenhouse roof and clear all lying

snow from the roof as it can cause the roof to buckle or collapse.

Site Preparation

 

1.

When selecting a site for  your greenhouse, Always try to select a sunny location, it is vital that you
choose as flat and level an area as possible.

2.

Supplier's  original  base  or  a  concrete  or  slab  base  will  provide  the  most  solid  foundation  for  your
greenhouse.

3.

Do 

not

 fix your building down until the building is fully assembled, including glazing.

4.

Avoid placing your greenhouse under trees or in other vulnerable locations.

5.

To minimize the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a hedge-
row or garden fence.

Statement

 

Summary of Contents for GS010993
























Reviews: