14
GB
will be glad to provide you with a cost
estimate. We can only process devices
which have been packaged sufficiently
and which have been dispatched with
correct stamping.
•
Note:
In case of complaint or service,
please deliver your device cleaned, and
with an indication of the defect, to our
service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
If you have a justified guarantee claim,
please contact our service centre by
telephone, which will then advise you on
how the claim will be processed.
• Defective units returned to us will be dis-
posed of for free.
Technical specifications
Chain sharpener ................... FSG 85 B1
Nominal input voltage .............230V~, 50 Hz
Power consumption ....85 W (S2:15 min)**
Rated resting period ...................ca. 5 min
Safety class ........................................ II
Mechanical rating .............................IP 20
Idle-running speed .....................5000 min
-1
Disk speed ........................... max. 50 m/s*
Adjustment angle ................. 30° left / right
Grinding disk
dimensions ............................... Ø 104 mm
diameter of bore .............................22 mm
Weight .............................................2.3 kg
Sound pressure level
(L
pA
) ......................83 dB(A); K
pA
=3 dB(A)
Sound power level (L
wA
)
measured ............96 dB(A); K
wA
=3 dB(A)
guaranteed .............................. 99 dB(A)
Vibration (a
n
) .............3.05 m/s
2,
K=1.5 m/s
2
*
The grinding disk must be able to withstand
a circulation speed of 50 m/s.
** Short-time duty: Do not run the unit for more
than 15 minutes at a time.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
Replacement parts
The following replacement parts can be or-
dered from the Grizzly Service Centre (see
address on page 77). When placing an
order, please specify the machine type and
the number of the replacement part.
Grinding disk .................................30211030
If other replacement parts are required,
please refer to the exploded drawing for
the part number.
