Q
Storage
o
Switch the product off and remove the battery
pack
14
.
o
Clean the product as described
(see “Cleaning”).
o
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
o
Always store the product in a place that is
inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
o
Attach the blade cover
13
.
o
We recommend using the original package
for storage or covering the product with a
suitable cloth or enclosure to protect it against
dust.
o
Regularly check the charge level of the
battery pack, if it is to be stored for an
extended period. Optimum storage conditions
are cool and dry.
Q
Transportation
o
Switch the product off and remove the battery
pack
14
.
o
Attach the blade cover
13
.
o
Attach transportation guards, if applicable.
o
Always carry the product by its handles.
o
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles.
o
Secure the product to prevent it from slipping
or falling over.
Q
Troubleshooting
WARNING!
u
Only perform the steps described within
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre or
a similarly qualified specialist if you cannot
solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
Problem
Possible cause Solution
Product
does not
start
Battery pack
14
not properly
attached
Attach properly
Battery pack
14
discharged
Remove and
charge the
battery pack
14
Battery pack
14
damaged
Check by
a specialist
electrician
Other electrical
defect to the
product
Check by
a specialist
electrician
Product
does not
reach full
power
Battery pack
14
capacity too low
Remove and
charge the
battery pack
14
Air vents are
blocked
Clean the air
vents
Unsatisfac-
tory result
Accessory is worn Replace with a
new one
Accessory not
suitable for
intended operation
Use suitable
accessory
Product sud-
denly stops
Product
overloaded
Remove the
product from the
working surface
and switch it on
again
Battery pack
14
discharged
Remove and
charge the
battery pack
14
Battery pack
14
too hot
Remove the
battery pack
14
and let it cool
down
Excessive
vibration or
noise
Accessory is
dull / damaged
Replace with a
new one
Bolts / nuts are
loose
Tighten bolts /
nuts
16 GB / IE / NI
