![FLORABEST FAHS 40-Li A1 Operation And Safety Notes Translation Of The Original Instructions Download Page 11](http://html1.mh-extra.com/html/florabest/fahs-40-li-a1/fahs-40-li-a1_operation-and-safety-notes-translation-of-the-original-instructions_2307255011.webp)
Q
Before use
Q
Attaching / removing the
battery pack
Attaching the battery pack:
1. Align the battery pack
14
to the battery pack
compartment
12
and slide it onto it. Ensure it
clicks noticeably in place.
Removing the battery pack:
1. Press the release buttons
16
and remove the
battery pack
14
.
Q
Charging the battery pack
NOTE
u
The battery pack
14
comes partly charged.
Charge the battery pack
14
prior to first use,
ideally at least 60 minutes.
u
Always pull out the plug of the charger
18
from
the mains before removing or connecting the
battery pack
14
to the charger.
u
Never charge the battery pack
14
when the
ambient temperature is below 10 °C or above
40 °C.
u
Never recharge a battery pack
14
again
immediately after rapid charging. This could
overcharge the battery pack
14
, thus reducing
the lifespan of the battery pack
14
and
charger
18
.
u
Rest the charger
18
for at least 15 minutes
between successive charging sessions.
u
If no battery pack
14
is inserted into the
charger
18
and the charger is connected to
mains, the charging status LED
19
flashes green.
1. Connect the battery pack
14
to the battery
charger
18
.
2. Insert the mains plug into the socket. The
charging status LED
20
lights up red, at the
same time the green charging status LED
19
will extinguish. Once the battery pack
14
is completely charged, the green charging
status LED
19
is lit continuously, indicating
that the charging process is complete. At the
same time the red charging status LED
20
will
extinguish.
3. Disconnect the charger
18
from the mains
and remove the battery pack
14
from the
charger.
4. Attach the battery pack
14
back to the
product (see “Attaching / removing the
battery pack”).
Charging status LEDs
Green LED flashing Charger ready
Red LED
continuously lit
Battery pack charging
Green LED
continuously lit
Battery pack fully charged
Red and green
LEDs flashing
Battery pack defect
Red and green LEDs
continuously lit
Battery pack too cold or
warm
Q
Checking the battery charging
level
o
Press the battery charging level button
15
to
check the charging level of the battery
pack
14
. The charging level will be shown
on the battery level indication light
17
.
4 Green LEDs
continuously lit
Battery pack fully charged
3 Green LEDs
continuously lit
Battery pack 75% charged
2 Green LEDs
continuously lit
Battery pack 50% charged
1 Green LED
continuously lit
Battery pack 25% charged
1 Green LED
flashing
Low battery charging level
o
Charge the battery pack
14
before operation
when it is at medium or low battery charging
level.
13
GB / IE / NI