Floorex Products Dustmaster DM-2660, Safety & Operator Manual

Page: 8 / 16

DM-2660 Safety & Operators Manual
1800 FLOOREX
PAGE 7. 1800 356 673
Electrical Safety
1. All electrical maintenance and repairs are to be carried out
by qualified persons only.
2. CAUTION - Line terminals may be alive when main switch
is in the off position. Disconnect all power at source before
performing any maintenance or repairs.
3. WARNING - DO NOT operate the Dust Extractor with any
electrical panels open.
4. Never operate the Dust Extractor in the rain or if heavy
moisture is present.
5. Never bypass over current devices in this the Dust
Extractor.
6. Never connect or disconnect power cables with voltage
present or while under load.
7. Disconnect all power connections and observe lock out /
tag out procedures before attempting to carry out any
maintenance or repair on any equipment.
8. Avoid any contact with any rotating parts or driven parts.
9. Never use equipment that has not been tested and tagged
(including cords).
10. Before connecting the Dust Extractor to power, check the
condition of all power leads and cables on, or used in
conjunction with the Dust Extractor. DO NOT USE the Dust
Extractor if any faults cuts, wear marks, bare wires out of
plugs or sockets are identified.
Get qualified persons to repair and re-tag it as required by
regulations in your country.