SANTA ANA, CA 92705
CO2 OR DRY COMPRESSED AIR OPERATED
MODEL : N5100-XXX
OPERATING PRESSURE 20 TO 80 PSI
6.18
(157)
2.42
(61)
2.22
(56)
1.00
(25)
0.77
(19)
2.89
(74)
1.98
(50)
4.14
(105)
PRODUCT DATA
Pump Design
............................................Duplex Diaphragm
Wetted Parts
Diaphragm Material........ Santoprene
®
, Viton
®
, Buna, or Geolast
Check Valve Material .......Santoprene
®
, Viton
®
, Buna, or Geolast
Housing material
........................................Acetal Copolymer
Ports
............................Gas Inlet & Outlet 1/4” (6.3 mm) Barb
Product Inlet 3/8” (9.5 mm) Barb
Product Outlet 3/8” (9.5 mm) Barb
Net Weight
......................................................1.10 lb. (0.5 Kg)
®
A registered trade mark of Monsanto Co.
®
A registered trade mark of I.E. DuPont Co.
PERFORMANCE SPECIFICATIONS
PUMP
Liquid Temperature
Min ..............................................40°F (4°C)
............................Max ..........................................120°F (49°C)
Priming
..............Dry ..........................................28 ft. (8.5 m)
............................Wet ..........................................32 ft. (9.8 m)
Flow Rates
........Max ....................Up to 2.5 GPM (9.5 LPM)
Gas Supply Pressure
................20 to 80 PSI (1.4 to 5.6 bar)
Noise Level
........Max ......................................................87dB
STANDARD MODELS
N5100-010 ..........Buna
N5100-020 ..........Viton
®
N5100-040 ..........Santoprene
®
N5100-050 ..........Geolast
®
DESCRIPTION
FLOJET Industrial N5100 Series Pumps are designed for
light general commercial and industrial applications.
These pumps are constructed from a selection of
materials for handling a broad range of chemicals*.
NOTE: Not to be used with any Fluids with a flash point
below 100˚F (38˚C).
*
For Chemical Compatibality of diaphragm material
please refer to the Chemical Compatibility Guide
referenced in F100-227.
Santoprene®, Viton ®, Buna, or Geolast Material with 1/2” Ports
N5100 Series
Industrial Air Driven Pump
DIMENSIONAL DRAWING
Inches (millimeters)
Dimensional tolerances
± 0.06 inches
Consult factory if precise
details are required.
40
(2.8)
20
(1.4)
60
(4.1)
80
(5.5)
Flow in GPM (LPM)
*Indicates Air Inlet Pressure in PSI
P
re
s
s
u
re
in
P
S
I
(B
a
r)
0.5
(1.9)
1.0
(3.8)
1.5
(5.7)
2.0
(7.6)
3.0
(11.4)
2.5
(9.5)
80*
60*
40*
INSTALLATION & OPERATION INFORMATION FOR MODELS N5100XXX
NOTE: For maximum running life do not exceed
80 PSI (5.5 bar) Gas Inlet Pressure
