FLOJET G70C Series, Installation & Operation Information

Page: 1 / 4

4.58
(116)
0.25
(6.4
5.2
(134)
Air Exhaust
Muffler
2.20
(56)
1.84
(47)
0.92
(23)
0.71
(19)
3.21
(82)
4.52
(115) 5.81
(148)
Fluid Out Fluid In
Air Inlet
PRODUCT DATA
Pump Design
............................................ Double Diaphragm
Wetted Parts
............................................................................
...... Body and Check Valves ................................ Polypropylene
...... Diaphragm .................................................... Kalrez
®
6190
........
Check Valve Seals .................................. Viton
®
Extreme™
...... Springs .............................................................. Hastelloy
®
Ports
...................................................... Air Inlet 1/4” (6.3 mm)
Liquid Inlet 3/8” (9.5 mm) - 1/2” (12.7 mm) - 3/4” (19.1 mm)
Liquid Outlet 3/8” (9.5 mm) - 1/2” (12.7 mm) - 3/4” (19.1 mm)
Net Weight
.................................................... 1.2 lbs. (0.54kg)
PERFORMANCE SPECIFICATIONS
Liquid Temperature Range:
............ 40 - 120°F (4.4 - 48.9°C)
Air
........................ Inlet Pressure: ...... 20 - 100 PSI (1.4 - 6.9 Bar)
............................ Inlet Temperature: .... 40 - 130°F (4.4 - 54.4°C)
.............................. Relative Humidity: .................................. 0 - 1%
Environment Temperature:
.................. 40 - 130°F (4.4 - 54.4°C)
Priming
................ Dry: .............................................. 15 ft. (4.5 m)
.............................. Wet: ................................................ 20 ft. (6.1m)
Flow Rate ............................................
Up to 5.0 GPM (18.9 LPM
)
Noise Level
.......... Max .......................................................... 87dB
NOTE: Pump Operation must remain within tolerances specified above
Kalrez
®
and Viton
®
Extreme™ are trademarks or registered trademarks of DuPont Performance
Elastomers. DuPont is a registered trademark of DuPont and its affiliates.
Hastelloy
®
A registered trademark of Haynes International, Inc.
John Guest
®
A registered trademark of John Guest International, Limited
.
DESCRIPTION
FLOJET Industrial G70C Pumps are designed for
general commercial and industrial applications. These
pumps are constructed from a selection of materials for
handling a broad range of chemicals
.
Allowed fluids for Not Allowed fluids for
Kalrez
®
parts Kalrez
®
parts
Lubricating Oils, Halogenated Solvents
Hydraulic Oils,
Vegetable Oils,
Alcohols, Keytones,
Aromatic Hydrocarbons,
Aliphatic Hydrocarbons,
Diluted Acids, Alkalis,
Soaps with solvents,
Automotive brake fluid,
Acetones, Ethanol, inks.
MARKS AND GENERAL INFORMATION
In complicance with the 94/9/CEE standards, the pumps carry the
following identification marks:
II 2G c IIB TX
: safety symbol to Din 40012
II 2G:
surface equipment for use in areas with the
presence of gases, vapors or mists in addition to
clouds of combustible dust in the air that occur
occasionally during normal operation (EN 1127-1
par. 6.3), both in external and internal areas
(ZONE 1).
c:
protection by constructional safety (EN 13463-5)
IIB:
Excluding the following products hydrogen,
acetylene, carbon disulphide.
TX:
Class of admitted temperatures. The processed
fluid temperature value must fall within such class
range and the user must comply with the
instructions contained in the manual and with
the current laws. Furthermore, the user must take
into account the ignition point of the gases, vapors
and mists in addition to clouds of combustible
powder in the air existing in the area of use.
G70C Series
Industrial Air Driven Pump
DIMENSIONAL DRAWING
Inches (millimeters)
INSTALLATION & OPERATION
INFORMATION FOR MODELS G70C XXX
P
ressu
re P
S
I (B
A
R
)
Flow Rate in GPM (1/min.)
Kalrez
¨
Diaphragm with 1/2Ó Ports
PERFORMANCE: KALREZ
®
WITH 1/2” PORTS
Air Flow Rate (SCFM)
1.0
1.3
1.7
2.2
Air In (PSI)
40
60
80
100
Note: Refer to page 4 for
General Safety Information.