background image

10.06

(256)

5.19 (MAX)

(127)  (MAX)

5.19 (MAX)

(127)  (MAX)

4.00

(102)

0.84

(21)

10.06

(256)

4.00

(102)

0.84

(21)

0.75

(19)

5.84

(148)

2.06

(52)

1.84

(47)

2.72

(69)

2.00

(51)

12.88

(328)

12.88

(328)

12.88

(328)

2.06

(52)

1.84

(47)

0.75

(19)

5.84

(148)

2.72

(69)

2.00

(51)

PRODUCT DATA

Pump Design

......................Air Operated Double Diaphragm

Wetted Parts

Diaphragm Material

..Santoprene

®

or Viton

®

Check Valve Seat Material

..Santoprene

®

or Viton

®

Housing and check valve material

................Polypropylene (Glass Reinforced)

Springs

........................................Hastelloy

Mounting Brackets and Manifolds

..................Polypropylene

Ports

..........................................Gas Inlet/Outlet 1/4” (6.3 mm)

Product Inlet/Outlet (Dual) - 1/2” NPT (12.7 mm)

Product Inlet/Outlet (Quatro) - 3/4” NPT (19.1 mm)

Net Weight 

Dual ..............................3.5 Pounds (1.59kg)
Quatro ..........................7.0 Pounds (3.18kg)

®

A registered trade mark of Monsanto Co.

®

A registered trade mark of I.E. DuPont Co

.

PERFORMANCE SPECIFICATIONS

PUMP

Liquid Temperature

Min ......................................40°F (4.4°C)

............................Max ..................................120°F (48.9°c)

Priming

..............Dry ......................................15 ft. (4.5 m)

............................Wet  ....................................20 ft. (6.1 m)

Flow Rates 

........Max  ..(Dual) Up to 10 GPM (37.8 L/min)

Flow Rates 

........Max (Quatro) Up to 20 GPM (75.6 L/min)

Gas Supply Pressure 

..........20 to 100 PSI (1.4 to 6.9 bar)

Noise Level

........Max ................................................90dB

DESCRIPTION

FLOJET Industrial G-57 Series Pumps are designed for
general commercial and industrial applications. These
pumps are constructed from a selection of materials for
handling a broad range of chemicals.

Allowed fluids for

Not Allowed fluids for

Santoprene 

®

materials

Santoprene 

®

materials

Potable Water, Acids

Oils, Solvents,Soaps with 

Alkaline, Soaps

Solvents, D-Limonene,

Alcohols, Ketones

Aromatic Hydrocarbons

Allowed fluids for

Not Allowed fluids for

Viton 

®

materials

Viton 

®

materials

Oils, Solvents, D-Limonene,

Ketones, Acetones, 

Aromatic & Halogenated

Automotive Brake Fluid,

Hydrocarbons, Acids

Ammonia, Ethanol

Dual (10 GPM) and 

Quatro (20 GPM) 

Air Operated Diaphragm Pumps 

DIMENSIONAL DRAWING

Inches (millimeters)

Consult factory if precise details are required.

40

(2.8)

20

(1.4)

60

(4.1)

80

(5.5)

100

(6.9)

Flow in GPM (l/min)

*Indicates Air Inlet Pressure in PSI

Dual (10 GPM)

(Model G257XXX)

Quatro (20 GPM)

(Model G457XXX)

Head Pressure in PSI (Bar)

0

5.0

(18.9)

10.0

(37.8)

0

5.0

(18.9)

10.0

(37.8)

15.0

(56.6)

20.0

(75.5)

100*

80*

60*

40*

20*

100*

80*

60*

40*

20*

INSTALLATION & OPERATION INFORMATION FOR MODELS G257XXX AND G457XXX

Dual (10 GPM) and Quatr

o (20 GPM) Air Oper

. Diaphragm Pumps 

Dual Pump (Model G257xxx)

Quatro Pump (Model G457xxx)

Summary of Contents for G257 Series

Page 1: ...9 bar Noise Level Max 90dB DESCRIPTION FLOJET Industrial G 57 Series Pumps are designed for general commercial and industrial applications These pumps are constructed from a selection of materials for handling a broad range of chemicals Allowed fluids for Not Allowed fluids for Santoprene materials Santoprene materials Potable Water Acids Oils Solvents Soaps with Alkaline Soaps Solvents D Limonene...

Page 2: ...S ARE PRESENT If used with C02 or N2 be sure the area is well ventilated CAUTION Do not clean or service FLOJET pumps hoses or valves while the system is pressurized Plastic CO2 air inlet ports do not have a check valve Prior to cleaning or servicing purge the pump by carefully tilting the pump so ports are facing up and remove suction line from source Turn air off and disconnect air inlet line Br...

Page 3: ... in place To install the flange housing prelube the o ring with Parker Super O Lube and install on flange housing and place housing over the pump body aligning the flange housing with the pump body ribs pressing it into place Install the first diaphragm and O ring on to the pump shaft by threading on to shaft using a flat blade screwdriver to hold the pump shaft until the diaphragm is tight Instal...

Page 4: ...e 2 Contaminated air supply 2 An air dryer might be required 3 Ruptured diaphragm 3 Replace diaphragm Pump runs but no fluid 1 A leak or break in the product inlet line 1 Replace product line 2 A leak or break in the product discharge line 2 Replace product line Pump leaks through exhaust port 1 Leak at upper exhaust manifold o ring 1 Replace exhaust manifold 2 Shaft seal O rings damaged or worn 2...

Reviews: