Floe PONTOON CRADLE PADS, Assembly Instructions Manual

Page: 1 / 16

SHEET 1 OF 16
FLOE PONTOON CRADLE PADS
ASSEMBLY INSTRUCTIONS
KIT P/N 511-02490-00 (SMALL LIFTS), 511-02495-00 (LARGE LIFTS),
511-02498-00 (TRI-TOON ADD-ON, LARGE LIFTS)
INSTRUCTION P/N: 611-02490-00
RELEASED 4/19/19
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN
55760
www.floeintl.com
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY
RECOMMEND THAT YOU CONSULT WITH YOUR BOAT’S MANUFACTURER TO
ENSURE THAT YOU ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY
POTENTIAL DAMAGE.
TOOLS REQUIRED
- (2) 7/16” SOCKET S /
WRENCH ES
- (2) 9/16” SOCKET S /
WRENCH ES
-3/4” SOCKET
-TAPE MEASURE
-TORQUE WRENCH
*LIFT NOT INCLUDED