SHEET 1 OF 16
FLOE QUICK ATTACH ROLL IN
X-SHALLOW WHEEL KIT
ASSEMBLY INSTRUCTIONS AND OWNERS MANUAL
4’, 5’, 6’ & 8’ WIDE DOCK SECTIONS
KIT P/N 510-27100-00, 510-27110-00
TOOLS REQUIRED
-9/16” SOCKET/WRENCH
-3/4” SOCKET/WRENCH
-CORDLESS DRILL WITH SOCKET
ADAPTER & 1-1/8” SOCKET OR
FLOE SPEED WRENCH
-TORQUE WRENCH
-TAPE MEASURE
-LEVEL
-BLOCKING MATERIAL
INSTRUCTION P/N: 610-27100-00
RELEASED 10/3/22
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com
*DOCK NOT INCLUDED
NOTE:
FOR USE IN APPROXIMATELY 0”-13”
OF WATER.
WE RECOMMEND THAT THE LOWER
DOCK FRAME IS A MINIMUM OF 8”
ABOVE THE WATER WHEN
PROPERLY ADJUSTED. HOWEVER, IF
YOU HAVE HIGH WAVE
CONDITIONS THAT COMMONLY
EXCEED 15”, WE RECOMMEND
THAT YOU RAISE YOUR DOCK
ACCORDINGLY.
NEVER ADJUST YOUR DOCK LEGS WITH
AN IMPACT WRENCH. NEVER ADJUST
YOUR DOCK LEGS WITH MORE THAN 15
FT-LBS OF FORCE. APPLYING TOO MUCH
FORCE TO YOUR DOCK LEGS WILL
DAMAGE THE MECHANISM.
