www.flockaudio.com [email protected] [email protected] @flockaudio
PATCH System
(Rear Connections)
Inputs
Outputs
Recording Interface
(Rear Connections)
1176 Compressor
(Rear Connections)
Pultec EQ
(Rear Connections)
Preamp
(Rear Connections)
Input
Output
Input
Output
Note: Physical Connection Signal Flow
All Physical Cable Connections must be properly connected in
order to confirm proper signal flow and functionality of the
PATCH System.
For Example:
PATCH
(Outputs)
—>
External Hardware
(Inputs)
External Hardware
(Outputs)
—>
PATCH
(Inputs)
Output Send fr
om
PA
TCH
to Compr
essor
Input Receive fr
om
Compr
esor to
PA
TCH
Output Send fr
om
PATCH
to Pr
eamp
Input Receive fr
om
Preamp to
PATCH
Input Receive fr
om
EQ to
PA
TCH
Output Send fr
om
PA
TCH
to EQ
Input Receive fr
om
Interface to
PA
TCH
Output Send fr
om
PATCH
to Interface
See Next Page for PATCH APP
Hardware Setup Menu Labelling
Input Receive fr
om
Mic to
PATCH
The PATCH Series models are all a +4 Professional Line Level Design. When
connecting Microphones directly to the PATCH Series Hardware, Standard Audio
Engineering Practices should be exercised such as the understanding that mixing
Signal Levels may or may not exhibit audio level &/or electronic noise floor artifacts.
If undesired results are experienced when connecting Microphones directly to the
PATCH Series, it is recommend to have a dB Booster or Transparent Preamp
between the Microphone and PATCH Model Connection
(I.E. Mic -> Pre/dB
Booster -> PATCH)
to achieve the best possible audio signal levels for routing.
Input
Output
(OPTIONAL) dB BOOSTER
DYNAMIC MICROPHONES
(OPT
IONAL
) TRAN
SPAR
ENT PR
EAMP
INPUTS & OUTPUTS ON THE REAR PANEL OF THE PATCH SYSTEM ARE
SEPARATELY DESIGNATED. YOU CANNOT USE AN OUTPUT AS AN
INPUT OR VICE VERSA. PLEASE ENSURE TO AVOID RISK OR DAMAGE
TO THE PATCH SYSTEM OR OTHER EXTERNAL HARDWARE THAT IS
CONNECTED THAT YOU MAKE THE PROPER CONNECTIONS
ACCORDINGLY.
INPUTS & OUTPUTS NOTICE
Microphone
SETTING UP YOUR PATCH MODEL FOR THE FIRST TIME
QUICK SETUP DIAGRAM