IF YOU HAVE QUESTIONS OR CONCERNS, OR ARE MISSING PARTS DO NOT RETURN SPRAYER TO THE STORE!
PLEASE CALL OUR CONSUMER SERVICE HOTLINE AT 1-800-253-4642. Year Round: Mon to Fri, 8 am to 7 pm, ET;
Addtional Summer Hours: March 1 to August 31: Sat and Sun 10 am to 4 pm, ET.
Or write us at: Root-Lowell Manufacturing Co., 1000 Foreman Rd., Lowell, MI 49331
Vivit us on the internet: www. rlflomaster.com
email: [email protected]
Users’ Manual
Backpack Sprayer Model 2204HD
WARNING!!
THIS PRODUCT IS DESIGNED TO SPRAY CHEMICALS THAT MAY BE HARMFUL AND COULD CAUSE
SERIOUS PERSONAL INJURY IF INHALED OR BROUGHT INTO CONTACT WITH THE USER. FAILURE TO READ
AND FOLLOW USER MANUAL INSTRUCTIONS BEFORE USE AND/OR MISUSE OF THIS PRODUCT COULD
RESULT IN EXPLOSIVE FAILURE WITH MAJOR INJURIES.
•
ALWAYS
water test sprayer before each use.
•
ALWAYS
wear long sleeve shirts, long pants, goggles, gloves and durable shoes.
•
ALWAYS READ AND FOLLOW
label instructions for the chemicals to be applied.
•
AFTER USE
release pressure and clean the sprayer.
•
ALWAYS RELEASE
pressure in sprayer before servicing.
•
DO NOT
alter the sprayer or any components.
•
DO NOT
spray flammable, caustic (i.e. acids, chlorines and bleach), corrosive, heated or self-heating
solutions with this sprayer.
•
DO NOT
store liquids in the sprayer.
•
NEVER
fill tank above the “MAX FILL LINE” on the tank.
A. NOZZLE ASSORTMENT
Adjustable Nozzle
Flat Fan Nozzle
B. NOZZLE ASSEMBLY
1. Flat fan nozzle
2. Gasket
3. Nozzle cap
4. Nozzle Body
5. Nozzle retaining nut
C. REMOVING ADJUSTABLE POLY NOZZLE
Unscrew the nozzle cap (1) from the nozzle body(3). This is best accomplished
while the retaining nut (2) is tightly fastened to the elbow (5). Next, unscrew the
retaining nut (2). Push the nozzle body (3) out of the retaining nut (2). The gasket
(4) will come out with the body. To reinstall, reverse above instructions.
D. WAND ASSEMBLY
1. Insert wand into flow control valve as shown.
2. Tighten the screw cap (clockwise) onto the flow control.
Hand tighten only.
E. PUMP HANDLE ASSEMBLY
Slide handle assembly over the pump rod. For right-handed spraying,
pump handle can be installed on the opposite side of the tank.
F. SHOULDER STRAP INSTALLATION
The tops of the shoulder straps are pre-attached to the sprayer via a
buckle. The lower portion of the straps are attached by fastening the
strap hooks to the metal frame where the frame exits the tank and bends.
G. FILLING THE SPRAYER
For best results, mix the spray solution in a separate container. Pour the spray solution through the filter basket in
the tank opening. Pump the sprayer handle to prime the pump and fill the pressure cylinder. You are now ready to
spray.
NOTE: Do not use wettable powders in this sprayer.
3
5
4
2
5
1
2
1
2
3
5
Screw cap Wand O-ring
Flow control
Gauge mount--
DO NOT
LOOSEN OR REMOVE
