?
2004, FlisKits, Inc., All rights reserved
Triskelion Instruction Sheet: FK-INS-SP010 Rev: B
From:
Office of Chief Engineer
Vehicle(s):
SP010
Effective Date:
16-Sept-2004
Chief Ordinance Engineer
Chief Deployment Engineer
Effective immediately, the attached procedures will be used in
the assembly and deployment of Launch Vehicle SP010,
known as
“Triskelion”,
released on the 2
nd
anniversary of the
birth of FlisKits, Incorporated.
Recommended Motors:
A8-3, B4-2, B6-4, C6-5
Flying Model Rocket
Assembly Instructions
Please read this entire instruction sheet before you begin, so
that you become familiar with each step in constructing the
Triskelion.
READ FIRST:
Congratulations! You are about to build a
quality model rocket kit from FlisKits. If this is your first model
rocket then you are in for a real treat. Even if you have built
other model rocket kits, please read on.
The Triskelion kit is designed as a perfect first rocket kit and
the assembly steps should be easy to follow. That does not
mean that this kit will be a simple project. On the contrary, you
will have to carefully read each instruction step with the
associated figure if you are to properly assembly this kit. Even
if you have built other kits, you may find a surprise or two
because all FlisKits model rocket kits are constructed with
wood fins and balsa nose cones which do not appear in many
other popular kits.
Take your time and use this as a good opportunity to learn how
to work with these new materials. This will serve as a big help
as you get into more complicated FlisKits kits.
To assemble this model rocket kit you will need the following
tools and supplies: Hobby knife, white glue
(DO NOT use Hot
Glue!),
sand paper, masking tape, pencil, and ruler. To finish
this model you will need sand paper, wood filler/sealer, primer
paint and other paints of your choice. Additional items that can
help with the construction include clear plastic wrap,
cellophane tape, and a hole punch.
Now, on to Step One!
