FLIR X6530sc Series, User Manual

Page: 25 / 118

Installing the camera 6
Figure 6.1 LCD touch screen.
1. Image statistics.
2. Add spot tool: center, cold, or hot.
3. Camera information.
4. Measurement configuration.
5. Adjust the near focus (not available for all lenses).
6. Autofocus (not available for all lenses).
7. Adjust the far focus (not available for all lenses).
8. Start acquisition in ResearchIR Max.
9. Auto-exposure.
10. Change the color palette.
6.3.1.1 Detaching the touch screen LCD
The LCD screen can be detached from the camera and used remotely when the camera
is mounted in a hard to reach location.
Note
• The camera can still be operated without the LCD screen connected.
• The LCD screen can be detached and attached while the camera is in operation.
6.3.1.2 Procedure
Follow the procedure below to install and detach the LCD screen from the camera:
1. Remove the LCD screw using a flat screwdriver or a coin.
2. Gently lift up the screen to disconnect it from the camera, being careful of the USB
connector.
#T810206; r. AA/43064/43088; en-US 17