FLIR ThermaCAM P65, User Manual

Page: 69 / 246

Action Step
After having carried out the same procedure on the following 9 persons, you can
do one of the following:
■
Actively continue to sample every new person by the F1 or F2 button, and let
the camera update the reference temperature
■
Stop sampling and let the camera trigger an alarm as soon as the alarm condi-
tions are met (> reference tempe delta alarm value)
9
8.4.2 Setting up a silent alarm
Action Step
Press the joystick to display the menu bar. 1
Point to Alarm on the Setup menu and press the joystick to display the Alarm
setup dialog box.
2
Select Type by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
3
Select Function by pressing the joystick left/right. This setting defines what mea-
surement function should be used to trigger the alarm.
4
Select Identity by pressing the joystick left/right to assign an identity to the function
selected above.
5
Select Output by pressing the joystick left/right until Silent is highlighted. 6
Specify the Alarm temp by pressing the joystick left/right.
➲
Alarm temp will only be available if Set from ref temp has been disabled below.
7
Specify whether the alarm temperature should be set from the reference tempera-
ture or not by pressing the joystick left/right. 8
Specify Delta alarm by pressing the joystick left/right.
➲
Delta alarm will only be available if Set from ref temp has been enabled above.
9
8.4.3 Setting up an audible alarm
Action Step
Press the joystick to display the menu bar. 1
Point to Alarm on the Setup menu and press the joystick to display the Alarm
setup dialog box.
2
Select Type by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
3
8
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
53
8 – Tutorials