■
Luminous intensity: 35 000 mcd in the middle of the light beam; 20 000 mcd
measured at an angle of ±10° from the light beam, and 5 000 mcd measured at
an angle of ±20° from the light beam.
LEMO 1B, 6 pins. The video lamp uses the same connector as
the RS-232/USB signal (see figure 16.1 on page 144).
Connector type:
Pin number
Type
Signal name
3
OUT
POWER
4
GND
GND
16.11.2
Remote control connector
10402803;a1
Figure 16.3 Pin configuration for remote control connector (on camera – operator’s side)
LEMO 1B, 8 pins
Connector type:
Pin number
Type
Signal name
1
POWER
P8VA
2
I/O
SCL_D
3
GND
GNDD
4
OUT
LVDS_DISP-
5
OUT
LV
6
GND
GNDD
7
I/O
SDA_D
8
POWER
P8VA
16
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
145
16 – Technical specifications & dimensional drawings
Summary of Contents for ThermaCAM P65
