FLIR ThermaCAM P65, User Manual

Page: 125 / 246

Comments Value Label
Selecting Transparent will add some transparency
to an isotherm color, making it easier for you to
see objects through the color.
To make the isotherm colors appear solid, select
Solid .
■
Transparent
■
Solid
Attribute
Selecting On will assign a label to the measure-
ment marker (a small box with a number).
■
On
■
Off
Label
10.2.3.7 Add diff
Point to Add diff and press the joystick to add a difference calculation, which will
appear in the result table.
For more information about difference calculations, see section 10.2.5.2 – Difference
on page 116.
10.2.3.8 Ref temp
10391403;a3
Figure 10.39 Reference temperature dialog box
The reference temperature can be used when the camera calculates temperature
differences
■
Point to Ref temp and press the joystick to set the temperature
■
To change the temperature, move the joystick up/down
■
Press the joystick to leave the dialog box
10.2.3.9 Remove all
Point to Remove all and press the joystick to remove all measurement functions and
markers from the screen.
10
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
109
10 – Camera program