FLIR ThermaCAM P45, User Manual

Page: 131 / 216

16 Technical specifications &
dimensional drawings
➲
FLIR Systems reserves the right to discontinue models, parts and accessories, and
other items, or change specifications at any time without prior notice.
16.1 Imaging performance
1.3 mrad Spatial resolution
± 2 °C/± 3.6 °F or ± 2 % of reading Accuracy
50/60 Hz, non-interlaced Image frequency
Automatic or manual Focus
Adaptive digital noise reduction Digital image enhancement
16.2 Detector
Focal Plane Array (FPA), uncooled microbolome-
ter,
320 × 240 pixels
Type
7.5–13 μm Spectral range
16.3 Image presentation
Built-in, high resolution color LCD (TFT) Viewfinder
16.4 Temperature ranges
Temperature range is subject to customer config-
uration, and/or three-digit camera type number.
Refer to the camera menu system to see available
temperature ranges.
Temperature range
16.5 Correction parameters
Set by number, or by selection in predefined list Emissivity correction
Automatic, based on input from distance, atmo-
spheric temperature, and relative humidity. Atmospheric transmission correction
Automatic, based on signals from internal sensors Optics transmission correction
16
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
115