FLIR ThermaCam P25, User Manual

Page: 92 / 192

Comments Value Label
Move the joystick left/right to enable or disable
noise reduction.
When Noise reduction is set to On , the image
noise decreases and the image appears more
stable.
However, when the camera or the object moves,
and
Noise reduction set to On , this may create
some image smearing.
■
On
■
Off
Noise reduction
Press the Adjust region button to display a region
on the screen that will be used when autoadjusting
the camera.
Adjust region
10.2.5.2 Save
10568203;a2
Figure 10.24 Save Setup dialog box
Figure 10.25 Explanations of the Save Setup dialog box
Comments Value Label
For a detailed explanation, see below.
■
Unique counter
■
Date
■
Directory
Image naming
■
If On is selected, all on-screen graphics will be
saved together with the image
■
If Off is selected, only the image (together with
any temperature information) will be saved
➲ The difference between images saved with or
without on-screen graphics will only be evident
when looking at the images using a third-party
image viewer.
■
On
■
Off
Overlay
Figure 10.26 Naming based on unique counter – explanations
Typical syntax: IR_nnnn.jpg
■
IR = infrared image IR
Unique counter nnnn
IR_0003.jpg Example
10
78
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
10 – Camera program