10.4
Menu system
10.4.1
Navigating the menu system
■
Press MENU/YES to display the vertical menu bar
■
Press MENU/YES to confirm selections in menus and dialog boxes
■
Press PWR/NO to exit the menu system
■
Press PWR/NO to cancel selections in menus and dialog boxes
■
Press the navigation pad up/down to move up/down in menus, submenus and di-
alog boxes
■
Press the navigation pad right/left to move right/left in menus and submenus, and
to change values in dialog boxes
10.4.2
Meas. mode
10429603;a2
Figure 10.8
Meas. mode
dialog box
Figure 10.9 Explanations of the
Meas. mode
dialog box
Explanation
Value
Label
■
Select
None
to disable the measurement mode.
■
Select
Spot
to lay out a spot, where the temper-
ature of the spot will be displayed in the result
table.
■
Select
Area max
to lay out an area on the
screen, where the maximum temperature in the
area will be displayed in the result table. A
measurement marker inside the area will contin-
uously indicate the maximum temperature.
■
Select
Area min
to lay out an area on the
screen, where the minimum temperature in the
area will be displayed in the result table. A
measurement marker inside the area will contin-
uously indicate the minimum temperature.
■
Select
Area avg
to lay out an area on the
screen, where the average temperature in the
area will be displayed in the result table.
■
Select
Diff spots
to calculate the difference
between two spots and display this difference
in the result table.
■
None
■
Spot
■
Area max
■
Area min
■
Area avg
■
Diff spots
Meas. mode
10
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
69
10 – Camera program
