8.2
Working with images
8.2.1
Acquiring an image
Action
Step
Point the camera at a warm object, like a face or a hand.
1
Adjust the focus by turning the focus ring at the front of the lens.
➲
Please note what is the locking ring and what is the focus ring in the figure on
page 52. Trying to adjust the focus by rotating the locking ring will remove the
lens.
2
If the camera is in manual adjust mode, press and hold down SEL for more than
one second to autoadjust the camera.
3
8.2.2
Freezing an image
Action
Step
Adjust focus by turning the focus ring at the front of the lens.
➲
Please note what is the locking ring and what is the focus ring in the figure on
page 52. Trying to adjust the focus by rotating the locking ring will remove the
lens.
1
If the camera is in manual adjust mode, press and hold down SEL for more than
one second to autoadjust the camera.
2
Briefly pressing SAVE/FRZ will display a confirmation box.
■
To save the image, press YES
■
To leave the confirmation box without saving the image, press NO
3
8.2.3
Saving an image
Action
Step
Adjust the focus by turning the focus ring at the front of the lens.
➲
Please note what is the locking ring and what is the focus ring in the figure on
page 52. Trying to adjust the focus by rotating the locking ring will remove the
lens.
1
If the camera is in manual adjust mode, press and hold down SEL for more than
one second to autoadjust the camera.
2
Briefly press SAVE/FRZ to freeze the image. This will display a confirmation box
where you will be prompted to accept or cancel the image. Accepting the image
will save it to the internal memory.
3
To save an image directly (without freezing the image first), press SAVE/FRZ for
more than 1 second.
4
8
42
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
8 – Tutorials
