FLIR ThermaCAM E320, User Manual

Page: 81 / 170

10.3 Selecting screen objects
10.3.1 Selecting screen objects
Some screen objects – e.g. the scale, the information field, a spot etc. – can be se-
lected by pressing SEL repeatedly until the object is either highlighted or surrounded
by small brackets. After three seconds the cursor will automatically be hidden.
Pressing SEL or the navigation pad will display the cursor again.
When an object is selected you can use the navigation pad to change its value or,
where applicable, change its position.
10.3.2 Examples of selected screen objects
10383303;a4
Figure 10.4 A selected measurement marker (spot). Press the navigation pad at this stage to move the
spot.
10383503;a4
Figure 10.5 A selected temperature scale. Press the navigation pad up/down at this stage to increase/de-
crease the
level , and left/right to increase/decrease the span .
10
Publ. No. 1558407 Rev. a155 – ENGLISH (EN) – February 6, 2006
67
10 – Camera program