FLIR ThermaCAM E320, User Manual

Page: 72 / 170

Description of part Callout
Laser LocatIR with lens cap
➲
Please note the following:
■
A laser icon appears on the screen when the Laser LocatIR is switched on.
■
Since the distance between the laser beam and the image center will vary by
the target distance, Laser LocatIR should only be used as an aiming aid. Always
check the LCD to make sure the camera captures the desired target.
■
Do not look directly into the laser beam.
■
When not in use, the Laser LocatIR should always be protected by the lens
cap.
5
Focus ring 6
Lens cap 7
9
58
Publ. No. 1558407 Rev. a155 – ENGLISH (EN) – February 6, 2006
9 – Camera overview