FLIR TCX series, Instruction Manual

Page: 37 / 150

Setup 6
6.1.14 Audio
The Audio tab allows you to enable / disable camera audio as well as choose the audio
encoding type. The settings in this menu will affect both one-directional and bidirectional
audio for the camera.
NOTE
This setting is only available on cameras with a microphone. Check the technical specifications for your
camera.
To configure audio settings:
1. Check Enable under Main Stream, Sub Stream, or both to enable audio.
2. Under Encode Mode , select an encoding mode from PCM , G.711A and G.711Mu .
3. Click Save to save changes.
4. Under Attributes , configure settings and set microphone and speaker volume levels.
5. Click Save to save changes.
6.2 Network
6.2.1 TCP-IP
The TCP-IP menu allows you to configure the camera for DHCP or Static IP addressing.
#LX400062; r.30885/35920; en-US 29