FLIR TCX series, Instruction Manual

Page: 34 / 150

Setup 6
To configure idle motion:
1. Under PTZ > Function , click Idle Motion .
2. Check Enable to enable the idle motion feature.
3. Select an idle motion for the camera. You can choose from Preset , Tour , Scan , or
Pattern .
NOTE
You must setup at least one of the corresponding functions to set it as the idle motion. For example,
you must setup at least one tour to select
Tour as the Idle Motion .
4. Under Idle Time , set the time in minutes before the idle camera performs the set idle
motion.
5. Press the Save button to save your selection.
6.1.10 Power Up
Choose an action for the PTZ camera to perform when it first powers up.
#LX400062; r.30885/35920; en-US 26