Note
The top heatsink will get hot when using the camera. It is recom-
mended that USB export is done directly after starting the device, as attempt-
ing to export the results after prolonged use might be problematic due to the
hot heatsink.
8.14
Remote update
When connected to the Internet via wifi, the camera will automatically down-
load software updates available in the FLIR Acoustic Camera Viewer. If an up-
date has been downloaded, it will be applied the next time the camera is
started. The current software version is visible when pressing the
settings
button.
8.15
USB update
In case the remote update feature cannot be used, the camera can also be
updated using a USB memory stick. Place the software update file provided
by FLIR Systems in the root directory of the the memory stick (i.e., not in any
folder). Open the USB port cover on top of the camera and insert the memory
stick in the USB port. Check that the orientation of the memory stick and the
port is correct before inserting the stick.
The camera will detect the software update present on the memory stick and
ask if you want to apply the update. Press
Yes
to copy the update to the cam-
era.
Do not remove the memory stick while the update is being copied.
Once the update is on the camera, you will be asked to restart the device to
apply the update. Remove the memory stick and put the USB port cover back
in place. Shut the camera down by unplugging the battery cable and start it
again by connecting the battery cable. The update will now be applied.
#T810536; r. AB/63437/63437; en-US
20
Summary of Contents for Si124
Page 31: ......
